- Opportunity Number:
- Contract Vehicle:
- STOC II
- Closing Date:
- Brief Summary:
The Joint Urban Test Capability (JUTC) Program has been CANCELLED due to a funding shortfall to meet key performance parameters within budget. No replacement for this program or reduced effort is currently planned.
The Program Executive Office for Simulation, Training and Instrumentation (PEO STRI); Project Manager for Instrumentation, Targets and Threat Simulators (PM ITTS); Instrumentation Management Office (IMO) appreciates the interest you have expressed in the JUTC Program.
The primary points of contact for this cancellation notice are:
Ms. Glenda M. Torres, Contracting Officer, U.S. ARMY Contracting Command – Orlando, phone: (407) 380-4413, email: firstname.lastname@example.orgMr. Michael (Mike) Landers, Project Director PM ITTS/IMO, phone: (407) 384-3530, email: email@example.com
INFORMATION POSTED JULY 10, 2013
The Program Executive Office for Simulation, Training and Instrumentation (PEO STRI); Project Manager for Instrumentation, Targets and Threat Simulators (PM ITTS); Instrumentation Management Office (IMO) is adjusting the acquisition strategy for the Joint Urban Test Capability (JUTC) Program. The previous approach was to evaluate written proposals and award a Firm-Fixed-Price contract, with options, for prototype demonstrators, Technical Feasibility Testing and subsequent options for production quantity in Third or Fourth Quarter FY14.
The purpose of this posting is to communicate the adjusted acquisition approach to industry.
PEO STRI PM ITTS IMO now plans to evaluate proposals in a multi-step process. This multi-step process includes submission of material samples along with submission of one full-sized reduced footprint of the Urban Building Replica (UBR) design. These items will be submitted simultaneously with the written proposal. The material samples and UBR design will be shipped to White Sands Missile Range (WSMR), New Mexico. Written proposals will be submitted to PEO STRI.
Specifically, you will submit two material samples representative of the exterior UBR wall material for testing and evaluation. The size of one sample will be approximately 18 inch by 18 inch and the other sample will be approximately 4 feet by 8 feet. These samples will be tested for radio frequency (RF) reflectivity and transmissivity to determine material realism utilizing test equipment at WSMR. You will also be submitting one full-sized reduced footprint of an UBR design. The full-sized reduced footprint of the UBR will have 2 stories and a ground footprint of approximately 64 to 144 feet squared. The first floor will have at least one door and one window. The second floor will have at least one window, one balcony, and one door for balcony access. There will be a pass-through/access to the second floor of the UBR for personnel and test equipment. The UBR will have a pitched roof. One purpose of the UBR is to demonstrate modularity, transportability, and mechanical reconfigurability. Another purpose of the UBR will be to test for RF, acoustic, laser, and Infrared. The material samples and the UBR design will be tested by the Government at WSMR. You will be required to travel to WSMR for the testing of the material sample and to set up your UBR design. Offerors who are successful in material sample testing and UBR design at WSMR, based on established evaluation criteria, will then have their written proposals evaluated.
The Government intends to award a cost type contract with firm-fixed price options to one or more offerors. During the cost type portion of the contract, you will develop prototype demonstrators which will be evaluated in a Technical Feasibility Test (TFT). Upon successful TFT, the Government will down select to a single contractor and exercise applicable firm-fixed price options. Due to this new acquisition strategy, anticipated contract award will now be First Quarter FY15. Options are also expected to be exercised in FY15.
It is the Government’s intention to issue a Draft Request for Proposal (RFP) prior to the Final RFP. The Government intends to hold a pre-solicitation conference following release of the Draft RFP. Please keep in mind that the adjusted acquisition strategy has not been finalized at this time. Final details will be set forth in the Draft RFP.
If you previously responded to the Sources Sought Notice posted on March 4, 2013, please indicate your continued interest in the JUTC competition based on this new acquisition strategy by providing an email to firstname.lastname@example.org with a courtesy copy to Mr. Michael Landers (email@example.com) no later than 3:30 PM Eastern Daylight Time (EDT) on July 31, 2013. Others who have not previously expressed an interest may also do so by providing the following to the emails identified above by the specified time: company name, address, Commercial and Government Entity (CAGE) code, and point of contact with name, title, phone number, and email address. Additionally, please provide a statement indicating if your firm is a large or small business under the previously specified North American Industry Classification System (NAICS) code of 333318 - Other Commercial and Service Industry Machinery Manufacturing. If further information is required, the Government will contact you.
In accordance with Federal Acquisition Regulation (FAR) 15.201(e), responses to this posting may be used by agencies for planning purposes, but are not offers and cannot be accepted by the Government to form a binding contract. The Government will not pay for any information received or costs incurred while preparing a response to this posting. Therefore, any cost associated with a response is solely at the interested vendor’s expense.INFORMATION POSTED MARCH 6, 2013
The RAGE Operations Manual referenced in paragraph 2.2 of the Draft Performance Specification is being provided to assist in your analysis of the JUTC Increment 1 effort.
SOURCES SOUGHT NOTICE - Posted March 4, 2013
The Program Executive Office for Simulation, Training and Instrumentation; Project Manager for Instrumentation, Targets and Threat Simulators; Instrumentation Management Office in partnership with the Department of Defense Test Resource Management Center Central Test and Evaluation Investment Program has a requirement to provide a Joint Urban Test Capability (JUTC). JUTC will include a set of urban test capabilities comprised of a representative Live Urban Area, Augmented Urban Environment (UE) Effects (AUEE), Virtual and Constructive UE (VCUE), Data Collection, Reduction, and Analysis (DCRA), Test Planning and Control, Test Architecture and Net-Centric Interoperability, Weapon System Urban Test Capability, Communications Jamming Urban Test Capability, and Infrared Counter Measure System Urban Test Capability. This project will provide Developmental Test and Operational Test capabilities through modularity and layering to create varied representative urban morphologies and test support capabilities. The first increment to be developed will include a portion of the Live Urban Area, the AUEE, VCUE, DCRA, Test Planning and Control, Test Architecture and Net-Centric Interoperability, and will be located at White Sands Missile Range (WSMR). Other JUTC requirements, such as live environments at China Lake and remaining virtual and constructive environments for WSMR, Naval Air Weapons Station China Lake, and Naval Air Station Patuxent River, will be addressed in later increments.
This Sources Sought Notice (SSN) is being issued to determine industry capabilities and identify potential sources for the procurement of JUTC Increment 1. A draft Statement of Work (SOW) and draft Performance Specification are provided for your review and to assist you in determining your interest in participating. The Government requests that you provide your expression of interest by submitting a capability statement regarding the requirements included in the draft SOW/Performance Specification as follows:
Cover Page:Include a cover sheet with the company name, address, Commercial and Government Entity (CAGE) code, and point of contact with name, title, phone number, and email address. Also indicate the SSN title and number.
Format:Font shall not be smaller than industry standard word processor 12-point Times New Roman. Electronic submissions shall be in MS Word format. Only electronic submissions are acceptable. The Government is not soliciting proprietary information; however, if submitted, it should be appropriately marked.
Length:Do not exceed five pages, exclusive of the cover page. In addition, up to three attachments may be included that consist of pre-printed commercial brochures or sales literature.
Size of Business:Provide a statement indicating if your firm is a large or small business under the North American Industry Classification System (NAICS) code identified below. Small businesses must comply with FAR 52.219-14 – Limitation of Subcontracting, regarding contract performance. Please identify how you plan to comply if the acquisition is set aside. If you are a small business only interested in subcontracting opportunities, please identify the areas you are interested in supporting.If a small business, identify if you are disadvantaged, 8(a), Disabled-Veteran, Veteran, Women-owned Business, or Hub-zone.
Your capability statement should demonstrate relevant experience, skills and ability to fulfill the Government's requirements for JUTC Increment 1 as described in the draft Performance Specification. The capability statement should contain sufficient detail for the Government to make an informed decision regarding your capabilities.
Respondents are asked to submit replies no later than 3:30 PM Eastern Daylight Time (EDT) on March 21, 2013 by email to firstname.lastname@example.org with a courtesy copy to Mr. Michael Landers (email@example.com). In addition to your capability statement, you are invited to submit questions/comments as a result of your review of the draft SOW and draft Performance Specification. Please provide your questions in a separate attachment from your capability statement. There is no specified format; however, please use 12-point Times New Roman and submit electronically in MS Word.
The Government anticipates a competitive, Firm-Fixed-Price contract for this effort. The NAICS designation for this acquisition is currently 333318 - Other Commercial and Service Industry Machinery Manufacturing. If industry has suggestions for possible NAICS codes that better fit this requirement, please identify them in your capability statement.
This action does not constitute a solicitation or Request for Proposal and is not a commitment by the U.S. Government to procure the subject products, services or information. The submission of this information is for PLANNING PURPOSES ONLY and is not to be construed as a commitment by the Government to procure any supplies or services, or for the Government to pay for the information received. Respondents are solely responsible for all expenses associated with responding to this notice. In accordance with FAR 15.201(e), responses are not offers and cannot be accepted by the Government to form a binding contract. NO SOLICITATION DOCUMENT EXISTS AT THIS TIME. This information is for program planning and acquisition strategy development.INFORMATION PRIOR TO SOURCES SOUGHT NOTICE
INFORMATION POSTED JANUARY 18, 2013
As mentioned during the December 6,2012 Joint Urban Test Capability Live Urban Area Industry Forum, the Program Office has used information from The U.S. Army Research Laboratory, Survivability/Lethality Analysis Directorate called The Urban Terrain Building Types (UTBT) (2nd Edition) to define standard geotypical building descriptions. It is the intention of the Program Office to include Dc5 and Do2 Urban Terrain Zones (UTZs) in the first increment. This report provides these descriptions and others on a worldwide basis using an established and accepted methodology. The UTBT report has been reclassified to Distribution A (approved for public release) and is therefore an extract of the original UTBT 2nd Edition.
In addition to the UTBT report , the questions and answers from the Industry Forum, as well as the attendee list, is being provided.
INFORMATION POSTED NOVEMBER 30, 2012
Please see the attached slides to be presented at the JUTC Industry Forum being held on December 6, 2012 at I/ITSEC. Questions relating to the slides may be submitted toSherry Alexander, Contract Specialist, at firstname.lastname@example.org 2:00 PM EST on December 4, 2012. These will be addressed during the Industry Forum.
INFORMATION POSTED NOVEMBER 29, 2012
Due to technical difficulties with hosting the Joint Urban Test Capability (JUTC) Industry Forum via Webinar, the forum will now be held on December 6, 2012 at the
Interservice/Industry Training, Simulation and Education Conference (I/ITSEC),Orange County Convention Center - West Concourse, 9800 International Drive, Orlando, FL 32819 in Conference Room 203A - Army Meeting Room,from 11:00 AM to 1:00 PM EST. As this is a location and date change, please contract Sherry Alexander, Contract Specialist, at email@example.com 2:00 PM EST on December 4, 2012 if you plan to attend. Please remember to submit questions you have regarding the TCRD and Increment 1 Table. These will be addressed during the Industry Forum.
We appreciate the interest shown in attending via a Webinar and hope to use this method of communication in the future.
INFORMATION POSTED NOVEMBER 26, 2012
The Joint Urban Test Capability (JUTC) is hosting an Industry Forum at U.S. Army Program Executive Office for Simulation, Training, and Instrumentation (PEO STRI) on December 10, 2012 from 9:00 to 11:00 AM EST. The purpose of the forum is to provide industry with information regarding the JUTC program. The Government plans to address any questions you may have regarding the Test Capability Requirements Document (TCRD) and Increment 1 Table previously posted. In addition, the project acquisition strategy, including the anticipated schedule, will be discussed. The forum will be held via a Webinar in an effort to save time and money for interested contractors. Local contractors are welcome to attend the forum in person, which will be held at PEO STRI in Orlando, Florida.
Contractors interested in participating in the forum must contact Sherry Alexander, Contract Specialist, at firstname.lastname@example.org by 2:00 PM EST on December 5, 2012. Please specify whether you plan to participate in person or via the Webinar. In addition, you may submit questions you have regarding the TCRD and Increment 1 Table to be addressed during the Industry Forum. Please keep in mind that the Government is still in the Market Research Phase and all aspects of the Acquisition Strategy have not been determined at this time.
Access instructions for the Webinar including browser test information or specific building and room information will be provided via a response to your email once you identify your interest in attending.ORIGINAL POSTING
The Program Executive Office for Simulation, Training and Instrumentation (PEO STRI); Project Manager for Instrumentation, Targets and Threat Simulators (PM ITTS); Instrumentation Management Office (IMO) is providing the Test Capability Requirements Document (TCRD) for the Joint Urban Test Capability (JUTC) project to industry.
JUTC will include a set of urban test capabilities comprised of a representative Live Urban Area, Augmented Urban Environment (UE) Effects (AUEE), Virtual and Constructive UE (VCUE), Data Collection, Reduction, and Analysis (DCRA), Test Planning and Control, Test Architecture and Net-Centric Interoperability, Weapon System Urban Test Capability (WS-UTC), Communications Jamming Urban Test Capability (CJ-UTC), and Infrared (IR) Counter Measure System Urban Test Capability (IS-UTC). This project will provide Developmental Test (DT) and Operational Test (OT) capabilities through modularity and layering to create varied representative urban morphologies and test support capabilities. The first increment to be developed will include a portion of the Live Urban Area, the AUEE, VCUE, DCRA, Test Planning and Control, Test Architecture and Net-Centric Interoperability, and will be located at White Sands Missile Range (WSMR). Other JUTC requirements, such as live environments at China Lake and remaining virtual and constructive environments for WSMR, Naval Air Weapons Station (NAWS) China Lake, and Naval Air Station (NAS) Patuxent (Pax) River, will be addressed in later increments.
To further assist in identifying capabilities included in Increment 1, please see the attached table. The first column provides a TCRD section reference. The second column provides a short capability description. The third column identifies the inclusion, partial inclusion, or exclusion from Increment 1. The last column identifies the expected source for procurement. This contemplated procurement is limited to Increment 1 only. Contract vehicle column description “Competitive Award” identifies those capabilities the project office expects to procure via competition. The description “Other” identifies those capabilities expected to use existing or other contract vehicles. Industry should direct their attention to “Competitive Award” items. The full Increment 1 list is provided for information purposes. Follow-on increments have not been determined at this time.
The TCRD, along with the table, is provided for general information only of the contemplated JUTC Increment 1 effort. Draft requirements specific to Increment 1 are forthcoming. Please hold all questions regarding requirements until after the posting of the draft requirements.
- Contracts POC:
- Technical POC:
- JUTC Increment 1 Draft Performance Spec 04MAR13
- JUTC Increment 1 Draft SOW 04MAR13
- JUTC Industry Forum 6DEC12 Attendee List
- JUTC Industry Forum 6DEC12 Questions and Answers
- JUTC Industry Forum Brief 6 Dec 12
- UTBT ARL-TR-4395_Dist_A_11-19-12